Skip to content

Explore Scientific 68° 24mm Waterproof Eyepiece

Save 16%
Original price $189.99
Current price $159.99
SKU EPWP6824-01

Description

Using advanced computer design, combinations of low dispersion and high refractive index optical glasses, and durable multilayer deposition coatings, Explore Scientific 62° Series Argon-Purged Waterproof extreme wide field eyepieces are optimized to produce high contrast, high resolution, and superior flat field characteristics. The visual effect of these eyepieces with their long eye-relief and their 68° apparent field is truly a full-immersion experience. The 62° Series eyepieces are parfocal (meaning they focus at near the same point regardless of the focal length you select) and come with a removable and foldable soft silicone rubber eyecup for the comfort of the observer, and as experienced astronomers know, eye comfort is critical when trying to observe at the visual limits of the telescope.

Protection from the Outdoors - By making the eyepiece body Argon-purged, the waterproof eyepiece internal elements will remain as pristine as the day they were assembled.

Argon atoms are larger than that of Nitrogen and therefore they are less likely to leak or diffuse their way through the seals over the life of the eyepiece. The atomic radius of Argon is larger than Nitrogen by 0.13 angstroms and has a larger atomic volume by 11.2 cubic centimeters/molecule. Argon also has superior inertness vs Nitrogen (i.e. forming few or no chemical compounds with other elements) that prevents adverse reactions with eyepiece components and therefore extends the longevity of the internal components, and also prevents chemical reactions with other elemental contaminants that may be introduced through a weakened seal. And, finally because Argon is less conductive of heat than Nitrogen, Argon cools slower thereby buffering the effects of rapid temperature changes of the optics.

The sealed, dry environment is impervious to internal fogging and contaminants such as fungus growing in between the lens elements. Our waterproof eyepiece is easier to clean, and there is no risk of cleaning solution migrating from the top of the lens and seeping around edges to be trapped in between elements. To insure a perfect seal we test every eyepiece in one meter of water for 30 minutes.

Specs

Item Number EPWP6824–01
Focal Length 24mm
Length 75.6mm
Width 56.2mm
Weight 11.6oz; 329g
Barrel Size 1.25inch
Eye Relief 18.4mm
Field Stop Diameter 27.2mm

Warranty

Limited Warranty is one year, which converts to the Explore STAR Transferable Extended Life of the Product Warranty when product is registered within 60 days of purchase. Click Here to register.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
★ Judge.me Reviews

Let customers speak for us

19 reviews
84%
(16)
16%
(3)
0%
(0)
0%
(0)
0%
(0)
Exceptional Mount

A couple of years ago, I wanted to replace my old VMA200 mount with something more modern.
While visiting the Paris Astronomy show (RCE 2012) I noticed the Nova120. At that time, it was a brand new offering that I have not seen before, hence my hesitation to purchase
I wanted to purchase a E.U product to guarantee the quality and ease of access to support in my own language. I checked the forums and heard nothing but good things about the Nova120 so I decided to purchase it.

I have used enough astronomical instruments in the last 30 years to know what great quality is. The Nova120 coupled with the PRISM v10 and a CDK20 (508 mm) helped me pull off 900s unguided images with great ease. (Raw FITS File here). Payload of this setup is about 80 kg (160 lb).

The dizzying slew speeds, excellent accuracy and painless tracking makes this hobby easy and enjoyable again.
After using this setup for a year and a half, the only problem I had was rebalacing the gear after changing scopes. The superb electronics and software included make this tasks even more easier that just eyeballing the scope for movement due to unbalance.

You can very easily watch the motor consumption and know where the unbalance is....that easy. I have so much data that it is becoming difficult yo keep up.
I have absolutely zero regrets, this purchase has made everything easier: No summer/winter worm-gear adjustments, no guiding... just start imaging night after night after night.

Eric Barbotin

Imaging Made Easy

Prism is my GoTo program for observatory control and imaging. Prism's many features make imaging taking a breeze.

I was concerned about giving Prism a try , especially as its quite expensive. So far Im very impressed and glad of my decision.
Im a beginner at all this so haven't tried other more recommended software, Prism appealed as it seems to do everything instead of using several programs 👍🏻

Great lightweight guide scope

This guide scope replaces a 400/80 that was waaay too heavy for what it did. The smaller 60mm scope does a great job guiding and I can RA balance with just one counter weight now - much better - and it looks like something Ferrari designed

Still learning Prism using Wireless links...

I have much of your software working at this time... I have it parked on my main computer, and a notebook... My main computer is a OverClock computer with 32 Gigs of RAM Clocking presently at 4400MHz with software parked on SSD drives... The rotation dome by NexDome is still not working... Most problems like this have to do with ASCOM Drivers... There is not very much detail information on how to use this software... I have to feel my way to a total operational staus... Second issue... The rain in the San Francisco Bay Area this year has limited my access to my larger telescope (12 inch SCT)... This rain has been so significant, I was force to weatherize my observatory... My goal here is,,, I am trying to remotely control my observatory totally. I have used Netgear Powerline 2000 to handle camera images and discover controlling rules to do that... High speed is vital for images with cameras over 3 Megs... I have both 12 Mega sensors and 24 Mega sensors... I am also using Netgear Nighthawk router and its mating extender to increase control signals to my observatory that is about 100 feet on the side of hill... I am also using Virtual Here software on a Raspberry Pi inside the observatory to solve the USB interface requirements... I started out using Model B and B+ on level 3 raspberry Pi's... I have moved to Level 4 Raspberry Pi to gain access to USB 3.0 technology... Big difference! I hope by early spring to have everything working... Bob Ritter MicTechS